The core - is made of soft aluminum wire. the veins are laid in parallel. With a cross-section of 25 mm2, a multi-wire connection is performed
Insulation - insulating PVC plastic material
The core - is made of a single insulated core or twisted from 2, 3, 4 or 5 cores. For the three -, four - and five-core cables running all cores of one section or one neutral conductor lower section, and the main conductor cross-section up to 16 mm2 — with the zero or grounding-residential
Shell - light-and heat-resistant PVC plastic
Условия эксплуатации и монтажа
laying-in cable sewers, tunnels, rooms, on the walls of buildings and structures and in the open air at a temperature not lower than -15 °C. It is not recommended to lay in the ground;
installation bending radii for laying-at least 10 and 7.5 outer diameters, respectively, for single-core and multi-core cables;
operating temperature – from -50 to +50 °C;
long-term permissible core heating temperature during operation — 70 °C;
the permissible heating of the cores in emergency mode is 80 °C with a duration of no more than 8 hours per day and 1000 hours for the entire service life
service life under normal operating conditions — at least 30 years